Search results

The purpose of this paper is to study the metal-Microbe interaction playing a crucial role in microbiologically influenced corrosion (MIC) and biofouling of materials in cooling water systems. Treatment regimens should be planned based on this understanding.

Attempts were made in the past decades to characterize and understand biofilm formation on important power plant structural materials such as carbon steel (CS), stainless steel (SS) and titanium in fresh water and in seawater to achieve better control of biofouling and minimize MIC problems.

This report presents the results of detailed studies on tuberculation-formed CS because of the action of iron-oxidizing bacteria and the effects of algae- and bacteria-dominated biofilms on the passivity of SS. The preferential adhesion of different bacterial species on SS under the influence of inclusions and sensitization was studied in the context of preferential corrosion of SS weldments due to microbial action. Detailed characterization of biofilms formed on titanium (the likely condenser material for fast breeder reactors) after exposure for two years in Kalpakkam coastal waters revealed intense biofouling and biomineralization of manganese even in chlorinated seawater. Studies on the effectiveness of conventional fouling control strategies were also evaluated.

The detailed studies of different metal/biofilm/microbe interactions demonstrated the physiological diversity of microbes in the biofilms that were formed on different materials, coupling their cooperative metabolic activities with consequent corrosion behaviour. These interactions could enhance either anodic or cathodic reactions and exploit metallurgical features that enhance biofilm formation and/or the capacity of microbes to mutate and overcome mitigation measures.

Development of non‐destructive methodology for detection of arc strike, spatter and fusion type of welding defects which may form on steam generator (SG) tubes that are in close proximity to the circumferential shell welds. Such defects, especially fusion‐type defects, are detrimental to the structural integrity of the SG. This paper aims to focus on this problem.

This paper presents a new methodology for non‐destructive detection of arc strike, spatter and fusion type of welding defects. This methodology uses remote field eddy current (RFEC) ultrasonic non‐destructive techniques and K‐means clustering.

Distinctly different RFEC signals have been observed for the three types of defects and this information has been effectively utilized for automated identification of weld fusion which produces two back‐wall echoes in ultrasonic A‐scan signals. The methodology can readily distinguish fusion‐type defect from arc strike and spatter type of defects.

The methodology is unique as there is no standard guideline for non‐destructive evaluation of peripheral tubes after shell welding to detect arc strike, spatter and fusion type of welding defects.

Friction welding is a solid state bonding process, where the joint between two metals has been established without melting the metal. The relative motion between the faying surfaces (surfaces to be joined) under the application of pressure promotes surface interaction, friction and heat generation which subsequently results in joint formation. Stainless steel is an iron based alloy, contains various combinations of other elements to give desired characteristics, and found a wider range of applications in the areas such as petro‐chemical, fertilizer, automotive, food processing, cryogenic, nuclear and beverage sectors. In order to exploit the complete advantages of stainless steels, suitable joining techniques are highly demanded. The Friction welding is an easily integrated welding method of stainless steel, which considered as non‐weldable through fusion welding. Grain coarsening, creep failure and failure at heat‐affected zone are the major limitations of fusion welding of similar stainless steels. Friction welding eliminates such pitfalls. In the present work an attempt is made to investigate experimentally, the mechanical and metallurgical properties of friction welded joints, namely, austenitic stainless steel (AISI 304) and ferritic stainless steel (AISI 430). Evaluation of the characteristics of welded similar stainless steel joints are carried out through tensile test, hardness measurement and metallurgical investigations.

The purpose of this study is to investigate the mechanical and tribological properties of the synthetic diamond coatings deposited on WC-Co cutting tools for their prospective applications in mechanical industry. In this work, the concept of nanocrystalline diamond, microcrystalline diamond and multilayer-diamond coating systems were proposed and deposited on WC-Co substrates with the top-layer nanocrystallinity, optimum thickness and interfacial adhesion strength for load-bearing tribological and machining applications. Also, the overall mechanical and tribological properties of all synthetic diamond coatings were compared for the purpose of selecting a suitable type of protective layer used on the surfaces of WC-Co cutting tools or mechanical dies.

Smooth and adhesive single layered and multilayered synthetic deposited on chemically etched cemented tungsten carbide (WC-Co) substrates using predetermined process parameters in hot filament chemical vapor deposition (HFCVD) method. A comparison has been documented between diamond coatings having different nature and architecture for the purpose of studying their mechanical and tribological characteristics. The friction characteristics were studied experimentally using ball-on-disc type linear reciprocating micro-tribometer under the influence of varying load conditions and within dry sliding conditions. Nanoindentation tests were conducted on each diamond coating using Berkovich nanoindenter for the measurement of their hardness and elastic modulus values. Also, the wear characteristics of all sliding bodies were studied under varying load conditions using cumulative weight loss and density method.

Depositing any type of diamond coating on the cemented carbide tool insert increases its all mechanical and tribological characteristics. When using boron-doping onto the top-layer surface of diamond coatings decrease slightly their mechanical properties but increases the tribological characteristics. Present analysis reveals that friction coefficient of all diamond-coated WC-Co substrates decreases with the increase of normal load. Therefore, maintaining an appropriate level of normal load, sliding time, sliding distance, atmospheric conditions and type of diamond coating, the friction coefficient may be kept to some lower value to improve mechanical processes.

As the single layered synthetic diamond coatings have not given the full requirements of mechanical and tribological properties when deposited on cutting tools. Therefore, the multilayered diamond coatings were proposed and developed to enhance the interfacial integrity of the nanocrystalline and microcrystalline layers (by eliminating the sharp interface) as well as increasing the hardness of tungsten carbide substrate. However, when using boron doping onto the top-layer surface of diamond, coatings decreases slightly their mechanical characteristics but also decreases the value of friction coefficient.

There have always been traditional differences between the various regions of the British Isles. For example, meat consumption is greater in the North than the South; most families take some meat at every meal and this extends to the children. The North is the home of the savoury meat products, eg., faggots, rissoles and similar preparations and a high meat content for such foods as sausages is expected; between 80 and 90% with the cereal only present for binding purposes. Present minimum meat contents would be considered a swindle, also the nature of the lean meat and the lean meat/fat ratio. The high water content similarly would have been unacceptable.

The purpose of this study is to identify how the privacy policy can be framed for protection of personal data and how the latest judgement of full bench of Supreme Court of India has dealt with right to privacy in India.

The study uses the latest Supreme Court judgement on right to privacy and historical cases on right to privacy in India. This paper uses Indian Constitution as a source of Information for study along with case laws and judgements of different courts in India.

This paper tries to find if personal data privacy is a fundamental right in India. In addition, the paper provides recommendations to different concerned authorities on protecting personal information in online platform.

This study deals with privacy issues so far as Indian citizens are concerns and does not focus on other countries. Moreover, the study tries to understand the issue of fundamental rights from Indian Constitution perspective. In addition, the recommendations provided to the policymakers and other authorities of India have wide implications for formulation of new policy and management of personal data, so that it should not go to wrong hands and the personal data and privacy is protected of the citizens.

Millions of people put their personal information in online platform. In addition, there are few government initiatives in India such as Aadhaar card where the biometric information is taken from the residents of India, and in many cases, the personal data are compromised under various circumstances. As the personal data of the citizens are in question, thus the study has direct practical implication mainly for all the citizens whose personal data are available in online platform.

This study has social implication as it dealt with the “personal data” of the citizens of India. As the paper discusses the issue of protection of personal data in the context of right to privacy, thus this study has a direct social impact so far as online citizen of India is concerned.

This paper is timely, original and discusses the contemporary issue of online data privacy and fundamental right in India. This paper is a useful resource for the researchers, policymakers and online users who deal with personal data-, right to privacy and data privacy policy-related areas.

Caste is the basic structural feature of Hindu society; all social scientists are agreed on this. Since Hinduism is generally recognised to be as much a social system as a religion, its social framework embodying caste rituals has governed the lives of the majority of Indians for hundreds of years. Having deep roots in tradition and enjoying sanction in all religious literature belonging to the pre‐British era, caste has been the dominant principle of social organisation since ancient times. In fact, barring the recent past, Hinduism has always been identified in the minds of most Indians with caste observances. Writes R.C. Zaehner: “…until a century or so ago the acceptance of the caste system was considered by the orthodox to be the sole effective criterion of whether one was or was not a Hindu. In matters of belief it mattered not at all whether one believed in one god or many, or not at all, nor did it much matter on how one interpreted ‘liberation’ or whether one rejected it outright so long as one fulfilled the duties prescribed for one's caste.”